General Support -> 10 Mode Playstation 3 Modded Controller

How to use your 10 Mode Playstation 3 Modded Controller

Click on the mod you would like to view instructions for:

Using Rapid FireUsing Rapid Fire Using Quick ScopeUsing Quick Scope Using Drop ShotUsing Drop Shot Using Fast ReloadUsing Fast Reload Using JitterUsing Jitter Using Sniper BreathUsing Sniper Breath Using Zombie ModeUsing Zombie Mode Using AkimboUsing Akimbo Using AutoburstUsing Autoburst Using TurbomeleeUsing Turbomelee Using Dual TriggersUsing Dual Triggers Using Button LayoutsChanging Button Layouts
What is Rapid Fire Controller?

Rapid Fire controller is designed to make semi-auto or "single shot" guns shoot fully-automatic ones. It is also used for ìsingle fireî or semi-auto guns as Rapid Fire Feature is faster and more accurate than normal firing. While Rapid Fire will not usually make a full-auto gun shoot any faster, it can have positive side effects on full-auto guns - such as eliminating recoil (especially in Rainbow 6 FPS games!), or help players conserve ammo on full-auto guns to achieve more headshots.

How Do I Operate Rapid Fire Controller?

Turn your controller on and sync to your Sony Playstation console by pressing Sync button ( Playstation button ) on your conroller. Player 1 LED on the controller and console will flash and stay on, indicating your controller has been synchronized. (You will only have to do the synchronizing procedure the very first time you use the controller. It will be synchronized to a console automatically once you power up the controller for all the other times).
To toggle Rapid Fire On , hold the mode switch on the back of the controller and then tap Fire Weapon Button (R1 Button in default button layout). Player 4 LED will twinkle and stay ON, indicating you have turned Rapid Fire ON.
Scroll to the next Rapid Fire mode by holding down the mod switch, press and hold Fire Weapon Button. (R1 Button in default button layout). The player 4 LED on the top of the controller will blink to let the user know which mode he or she has just changed to. When the desired mode is reached, release the mod switch to stop changing modes. For example, Mode 2-Player 4 LED blinks 2 times and stays ON.
If you change modes while playing, the controller will always remember the last mode you were playing with before powering down. Therefore, this setting is really only meaningful the first time you power up your controller after programming it.

Our 10 mode chips have 10 programming modes with default factory speeds, which are tuned for the following games:

ModeGameSpeed (shots per second)
Mode 1Call of Duty: Modern Warfare 3 All other pistols9.7
Mode 2Call of Duty: Modern Warfare 3 MK14; BLACK OPS 27.3
Mode 3Call of Duty: Modern Warfare 3 P9911.7
Mode 4Call of Duty: Black Ops; BLACK OPS 27.2
Mode 5Call of Duty: Modern Warfare 28.2
Mode 6Call of Duty: Modern Warfare (use doubletap perk)10.2
Mode 7Halo series9.3
Mode 8GTA IV23.3
Mode 9Gears of War series8.5
Mode 10*Call of Duty: World at War6.9
* Mode 10 is a special mode designed specifically for Call of Duty: World at War. We recommend only using this mode for COD: WAW.
To turn Rapid Fire OFF quickly, hold the mod switch and tap d-pad DOWN button. Player 4 LED will go OFF.

What Games Is Rapid Fire Feature Compatible With?

Rapid Fire controller is compatible with all first person shooter games on the market such as Call Of Duty, Battlefield, Halo, Gears Of War, Grand Theft Auto Games and many more!

Instructions For Advanced Users What Are Adjustable Settings?

Player can enter preferred speeds in Modes 1 through 10. However, itís also important to know that the software developers may have set a universal speed cap for each video game. The cap is different for every game. If you try to dial in your Rapid Fire speed above this cap, your gun will actually shoot slower, or not shoot at all. Always try starting out at a slower speed and increase your speed in small intervals. For example, start out at a low speed such as 6 or 7 shots per second, then increase by 0.5 shots-per-second until you feel that the gun is starting to "sputter" or slow down. You are probably reaching the game's speed cap.
The controller can remember up to ten different Rapid Fire speeds in "shots per second". Many different factors can affect the performance of your Rapid Fire controller, including your console (newer models have more power and RAM), the quality of your internet connection, and whether or not you are the current host of the match.
- Rapid Fire speed is programmed by individually setting the tens digit, the ones digit, and the decimal digit. For example, if the speed is 16.2 shots per second. "1" is the tens digit, "6" is the ones digit, and "2" is the decimal digit.
- Any time an LED or LED's flash very quickly, this means one of your numbers is set to "0". Otherwise it will slowly blink the number.
-When in Rapid Fire speed programming mode, hold L1 to decrease speed, R1 to increase speed, or tap the TAC switch to save the setting.

User Rapid Fire Programming Instructions

  1. Power your controller UP.
  2. Turn Rapid Fire ON.
  3. Scroll to the mode you want to program (1-10), before initiating the programming sequence.
  4. Press and hold Mode Switch on the back of the controller+ L1, R1, and R2 at the same time. Player 3 and Player 4 LED's will blink rapidly. The mod is now in programming mode, and is awaiting user input.
  5. The controller will let you know that it has entered programming mode by alternating the Player 3 and 4 LED's a few times.
  6. The controller will then flash the tens digit to you on the Player 4 LED. Adjust the speed and then tap the tac switch to move to the next digit.
  7. The controller will then flash the ones digit to you on the Player 3 LED. Adjust the speed and then tap the tac switch to move to the next digit.
  8. The controller will then flash the decimal digit to you on the Player 3 and Player 4 LEDs. Adjust the speed and then tap the tac switch.
  9. The controller will let you know that it saved your new speed by alternating the Player 3 and 4 LED's a few times.
  10. The controller will always remember the last programming speed you have before powering down.

What Is Quick Scope Mode?

Quick scoping is widely used in Call of Duty games. The idea with a quick scope is to use a sniper rifle, scope IN and fire the shot just as the gun scopes in. Get the timing and the aiming down just perfectly, and you can become a one-man commando with your sniper rifle.
Quick Scope Mode is highly recommended and ranks top 5 modes in current technology.

How Does Quick Scope Mode Work?

To fire a Quick Scope shot, TAP your scope button (L1 Button in default button layout). The mod will automatically scope in, take the shot, and descope.

How Do I Operate Quick Scope Mode?

When in the default button mapping layout, Quick Scope is activated by holding the mod switch on the back of the controller and then tapping your melee key (Right Thumbstick). Player 3 LED will blink and then stay ON to lets user know that a special mode has been turned on.
To turn Quick Scope OFF hold the mod switch on the back of the controller and tap melee key (Right Thumbstick). Player 3 LED will go OFF.
You can always turn all exclusive mods OFF by holding mode switch on the back of the controller and taping X Button at any time.

What Games Is Quick Scope Mode Compatible With?

Quick Scope Mode is compatible with all Call Of Duty Games.

What Is Drop Shot Mode?

Drop Shot Mod allows player to lay down and shoot automatically at the same time.
This mode is highly recommended and ranks top 5 modes in current technology.

How Does Drop Shot Mode Work?

When Drop Shot is enabled, and you fire your weapon, your soldier will automatically drop to the ground - making it very difficult for your opponent to shoot you, as he is left shooting in the air where you used to be! Use the left trigger to aim against the opponent while pressing the Drop Shot button.
*Drop Shot Mode and Rapid Fire feature can be used simultaneously*

How Do I Operate Drop Shot Mode?

To turn Drop Shot Mode ON, hold the mod switch on the back of the controller and then tap the Crouch Button (Circle Button). Player 3 led will twinkle and then stay ON to let user knows a special mode has been activated.
To toggle Drop Shot Mode OFF, hold the mod switch on the back of the controller, and tap the Crouch Button (Circle Button). Player 3 LED will twinkle and then turn OFF.
You can always turn all exclusive mods OFF by holding mode switch on the back of the controller and taping X Button at any time.

What Games Is Drop Shot Mode Compatible With?

Drop Shot Mode is compatible with all Call of Duty games.

What Is Fast Reload Mode?

Fast Reload is a mode enabling a player to reload the guns he/she is using faster than normally. Technically, it is a glitch in the Call of Duty series of games. Fast Reload is most effective on Modern Warfare, MW2, and MW3. It is not as effective on Black Ops, because Black Ops is using a different graphics engine that is not as susceptible to the Fast Reload glitch.
Out Fast Reload technology now works with MW3.

How Does Fast Reload Mode Work?

When you press the reload button, your character begins to reload. The ammo clip bar will actually reach a full bar before the animation sequence of the reload is done. If you hit your Change Weapon button twice very quickly just after the ammo reaches a full bar, but before the animation sequence has completed, you can start firing again sooner than your opponent. Thus you have just completed a "Fast Reload", because it's faster than letting the full reload animation sequence play out.
Getting the timing down perfectly is difficult to impossible for some players. This is where the Fast Reload feature of the modded controller comes into play. It will automatically wait out this delay and press the Change Weapon Button for you at just the right time. You must enter the correct Fast Reload delay time for your gun though.
NOTE: Fast Reload does not work on some shotguns or sniper rifles. Fast Reload only works on guns that have a clip - it will not work on guns where the bullets are loaded one-at-a-time. There are several different factors that affect Fast Reload, including the perks that you select. Perks such as Sleight of Hand will actually change the Fast Reload timing. Different guns have different Fast Reload settings. And if you have the Sleight Of Hand perk enabled, your Fast Reload timings will change again.
We encourage you to "tune in" the perfect Fast Reload speed for your favorite weapon. If your Fast Reload delay is set too quick, then the controller will interrupt the reload sequence before your ammo reaches a full bar. If the Fast Reload delay is set too slow, then the controller won't interrupt the animation sequence soon enough (and you don't gain any advantage).

How Do I Operate Fast Reload Mode?

To toggle Fast Reload On, hold mode switch on the back of the controller and then tap Reload Button (Square Button).Player 3 LED will flash and stay ON, indicating you have turned Fast Reload ON.
Scroll to the next Fast Reload mode by holding down your mod switch on the back of the controller, and holding Reload button (Square Button). The player 3 LED on your controller will blink to lets user know which mode he has just changed to. When you have reached the desired mode, release the mod switch to stop changing modes. (Example: Mode 2-Player 3 LED flashes 2 times and stays ON). Please note, when you will activate the mode next time, it will automatically be set to the last mode used.

10 Fast Reload Modes are available with default factory speeds. They can also be customized:

ModesUnit Delays
Mode 1Gun 1 - Timing 33
Mode 2Gun 2 - Timing 34
Mode 3Gun 3 - Timing 36
Mode 4Gun 4 - Timing 42
Mode 5Gun 5 - Timing 53
Mode 6Gun 6 - Timing 54
Mode 7Gun 7 - Timing 56
Mode 8Gun 8 - Timing 63
Mode 9Gun 9 - Timing 213
Mode 10Gun 10 - Timing 214
To turn Fast Reload OFF quickly, hold the mod switch on the back of the controller and tap Reload Button (Square Button). Player 3 LED will go OFF.
You can always turn all exclusive mods OFF by holding mode switch on the back of the controller and taping X Button at any time.

What Games Is Fast Reload Mode Compatible With?

Fast Reload Mode compatible with all Call of Duty Games.

Instructions For Advanced Users What User Has to Know Before Setting Up Fast Reload Unit Delays

Delay unit is different for each gun. Each COD game and each gun can be different, and it can be affected by the perks and the secondary that the combatant is holding. This is why customization is so important; there are hundreds of different values depending on the customer's soldier configuration.
Fast reload delays are programmed by individually setting the hundreds digit, the tens digit, and the ones digit. For example, if the reload delay is 105 units, "1" is the hundreds digit, "0" is the tens digit, and "5" is the ones digit.
Any time an LED or LED's flash very quickly, this means one of your numbers is set to "0". Otherwise it will slowly blink the number.
When in Fast Reload speed programming mode, hold L1 to decrease speed, R1 to increase speed, or tap the tac switch to save the setting.

Fast Reload delay programming
  1. Power your controller UP
  2. Turn Fast Reload ON
  3. Scroll to the sub mode you want to program (1-10), before initiating the programming sequence
  4. Press and hold Mode Switch on the back of the controller + R1 and L1 buttons and then tap reload Button (Square Button). Player 3 and Player 4 LED's will blink rapidly.
  5. The controller will then flash the hundreds digit to you on the Player 3 and Player 4 LEDs. Adjust the speed and then tap the TAC switch to move to the next digit.
  6. The controller will then flash the tens digit to you on the Player 4 LED. Adjust the speed and then tap the TAC switch to move to the next digit.
  7. The controller will then flash the ones digit to you on the Player 3 LED. Adjust the speed and then tap the TAC switch.
  8. The controller will let you know that it saved your new speed by alternating the Player 3 and 4 LED's a few times.
  9. The controller will always remember the last programming "delay units" you set before powering down.
What Is Jitter Mode?

Jitter mode Increase the firing rate of semi-auto guns.

How Does Jitter Mode Work?

When using any burst firing weapon, activated Jitter Mode decreases the time between bursts, making guns shoot faster. Jitter Mode is effective at a close range, but it might reduce the accuracy at a long range. Once a rifle is scoped IN, you can use normal firing. Jitter Mode was patched in MW3 and, therefore, only works in games prior to MW3.

*Jitter Mode and Rapid Fire feature cannot be used simultaneously.
How Do I Operate Jitter Mode?

To enable Jitter Mode on your controller, hold the mod switch on the back of the controller and tap D-pad UP. Player 4 LED will flash once and stay LIT, indicating you have turned Jitter Mode ON.
User is able to switch between different Jitter sub modes by holding the mod switch on the back of the controller, and then holding the D-pad UP. The player 4 LED on the controller will blink to let user know which sub mode he has just changed to. When desired sub mode is reached, release the mod switch to stop changing sub modes. (Example: Sub Mode 2-Player 4 LED flashes 2 times and stays LIT) If user changes sub modes while playing, the controller will always remember the last sub mode he was playing with before powering down.
Four Jitter sub modes are available:

ModesNotes
Mode 1Jitter YY method. Jitter is always on
Mode 2Jitter YY method. Jitter is disabled while you scope your rifle
Mode 3Jitter XYY method. Jitter is always on
Mode 4Jitter XYY method. Jitter is disabled while you scope your rifle
To toggle Jitter Mode OFF, hold the mod switch on the back of the controller, and tap the D-pad DOWN. Player 4 LED will twinkle and then turn OFF.

What Games Is Jitter Mode Compatible With?

Jitter Mode compatible with all Call of Duty Games except Modern Warfare 3.

What Is Sniper Breath Mode?

This mode was specially designed for sniper rifles in Call of Duty and Battlefield games. It automatically holds sniperís breath when scoping in.

How Does Sniper Breath Mode Work?

Upon activation, the mode will hold sniperís breath when scoping. You (the player) no longer have to push left thumbstick to hold breath.

How Do I Operate Sniper Breath Mode?

To enter into the Sniper Breath Mode on your controller, hold the mod switch on the back of the controller and Push In Left Thumbstick. The Player 3 LED will twinkle, and then stay ON to let user knows Sniper Breath Mode is ready to use.
To toggle Sniper Breath OFF, hold the mod switch on the back of the controller, and Push In Left Thumbstick. Player 3 LED will twinkle and then turn OFF.
You can always turn all exclusive mods OFF by holding mode switch on the back of the controller and taping X Button at any time.

What Games Is Sniper Breath Mode Compatible With?

Sniper Breath Mode compatible with all Call of Duty and Battlefield Games.

What Is Zombie Auto-Aim Mode?

Zombie Auto Aim Mode was specially designed for Call Of Duty series such as Zombie in Black Ops and Campaign in Modern Warfare 2 and 3.
Zombie Mode is highly recommended and ranks top 5 modes in current technology.

PLEASE NOTE: Zombie Mode is NOT compatible with Black Ops 2.

How Does Zombie Auto-Aim Mode Work?

Zombie mode allows you to auto-aim to the nearest zombie's chest or head while scoping your rifle. Any time you pull out Left Trigger to aim, itís going to lock under the nearest zombies head.

How Do I Operate Zombie Auto-Aim Mode?

To enter Zombie Mode on your controller, hold the mod switch on the back of the controller and tap your throw-tactical button (L2 Button in default button layout). The Player 4 LED will twinkle, and then stay ON to let you know Zombie Auto-Aim Mode is ready.
To change to a different Zombie Sub Mode, hold the mod switch on the back of the controller and hold throw-tactical button (L2 Button in default button layout), then count the number of blinks on the Player 4 LED. (Example: Sub Mode 2-Player 4 LED flashes 2 times and stays LIT).
Two different Zombie Sub Modes are available as follows:

ModesNotes
Mode 1Zombie auto-aim, but with Rapid Fire disabled
Mode 2Zombie auto-aim plus Rapid Fire enabled
To turn Zombie Mode OFF, hold the mod switch on the back of the controller and tap D-pad down. Player 4 LED will twinkle and then turn OFF.

What Games Is Zombie Auto Aim Mode Compatible With?

Zombie Mode is compatible with Call of Duty games such as Campaign in Modern Warfare and Zombies in Black Ops.

What Is Akimbo Mode?

Akimbo Mode not only allows you to control dual-wielded guns with only one fire trigger instead of using two triggers, but with a new Akimbo sub mode technology you will have a full control of toggling in between primary and secondary weapons turning Rapid Fire on and off.
This mode is highly recommended and ranks top 5 modes in current technology.
Unleash the hidden power of:

  • Fully-auto machine pistols
  • Single-shot hand guns
  • Dual-wielded pistols
  • Semi-automatic pistols

How Does Akimbo Mode Work?

For example, in order to fire dual-wielding CZ75 pistols in Call of Duty: Black Ops, you have to pull the left and the right triggers to fire both pistols. Akimbo is designed to give you an advantage in focusing better on your game by cutting down unnecessary finger triggering functionalities. It also adds the power of Rapid Fire to your guns. This is absolutely deadly at a close range.

How Do I Operate Akimbo Mode?

To toggle Akimbo Mode ON,while holding the Mod Switch on the back of the controller, tap left D-Pad button. The player #4 LED indicator will briefly twinkle and stay on lit to let you know that Akimbo is ready to rock!
To change Akimbo Sub Modes By holding the Mod Switch (which is located on the back of the controller) and D-Pad Left button, Akimbo sub mode selection moves forward. Player 4 LED light indicates which sub mode you have chosen. The number of times Player 4 LED light flashes will represent the number of your four sub modes. The controller will always remember the last sub mode played in before powering down.
There are several different akimbo sub modes available that allow you to further customize your Akimbo experience:

Mods Weapon Notes
Primary Secondary (Akimbo)
1  Semi-Auto Shotguns, Burst Rifles, Single Fire Rifles, Semi-Auto Sniper Rifles Semi-Auto, Single Shot Pistols, Single Shot Handguns When you scope in your primary rifle, Rapid Fire stays turned on
2 Fully-Auto Sub Machine Guns, Fully-Auto Assault Rifles, Light Machine Guns, Fully-Auto Shotguns Semi-Auto, Single Shot Pistols, Single Shot Handguns When you scope in your primary rifle, Rapid Fire turns off
3   All Dual Wield Guns Akimbo mode stays turned on no matter what other buttons you press
To toggle Akimbo Mode OFF, hold the mod switch on the back of the controller, and tap the d-pad down button. Player 4 LED will twinkle and then turn OFF.

What Games Is Akimbo Mode Compatible With?

Akimbo Mode compatible with all Call of Duty Games.

What Is Auto Burst Mode?

Auto Burst allows users to set single shot weapons to burst fire rounds of 2, 3, 4, and 5 shots.

How Does Auto Burst Mode Work?

When using a single-fire rifle such as the FAL , MK 14, and etc., the user is able to simulate burst firing by holding Fire Button (Right Trigger in default button layout).
NOTE: The controller will burst at the same speed as whatever Rapid Fire Mode you currently have selected. If you have your Rapid Fire mode set too high and above the game's speed cap, you may not get all of the burst count. If this happens, try reducing your Rapid Fire speed settings. [For more information visit Rapid Fire instructions]

How Do I Operate Auto Burst Mode?

To enable Burst Firing hold your mod switch on the back of the controller and tap D-pad right button. Player 4 LED will flash once and stay on, indicating Auto Burst Mode is ON.
User is able to change to different burst firing sub mode by holding the mod switch and D-pad Right Button. The Player 4 LED on the controller will blink to let the user know which sub mode is set. When desired sub mode is reached, release the mod switch to stop changing sub modes. (Example: Sub Mode 2-Player 4 LED flashes 2 times and stays on). If user changes sub modes while playing, the controller will always remember the last sub mode before powering down.
Here are the factory bursts for the four sub modes:

Sub ModesBursts
Mode 1Rapid Fire with 2-round bursts
Mode 2Rapid Fire with 3-round bursts
Mode 3Rapid Fire with 4-round bursts
Mode 4Rapid Fire with 5-round bursts
To turn burst firing OFF, hold your mod switch on the back of the controller and tap the D-pad down. Player 4 LED will go OFF.

What Games Is Burst Firing Mode Compatible With?

Auto Burst mode is compatible with all first person shooter games on the market such as all Call Of Duty, Battlefield, Halo, Gears Of War, Grand Theft Auto, etc., including every game series.

What Is Turbo Melee Mode?

Turbo Melee Mode significantly decreases the time user has to wait between knife attacks in Modern Warfare 2 and Modern Warfare 3. It can also be used to decrease the wait time between Riot Shield melee attacks. Turbo Melee is compatible with both "standard" and "tactical" button configurations.

How Does Turbo Melee Mode Work?

Once you have activated Turbo Melee Mode, all you need to do to perform a Melee attack is press your melee attack button (Right Tnumbstick in default button layout). Get ready for knife attack multi kill sprees! Or easier kills with the riot shield! Please note, Turbo Melee glitch requires the combatant to be holding Semtex.

How Do I Operate Turbo Melee Mode?

To activate Turbo Melee Mode, hold mode switch on the back of the controller + hold THROW LETHAL (R2 Button in default button layout) The Player 3 LED will twinkle to let user knows that he has activated Turbo Melee Mode.
NOTE: In order for Turbo Melee to perform correctly, your soldier needs to carry Semtex Grenade.
To disable Turbo Melee Mode, hold the mode switch on the back of the controller hold mode switch on the back of the controller + hold THROW LETHAL (R2 Button in default button layout). Player 3 LED will twinkle and then go OFF to let you know that this special feature has been turned OFF.
You can always turn all exclusive mods OFF by holding mode switch on the back of the controller and taping X Button at any time.

What Games Is Turbo Melee Mode Compatible With?

Turbo Melee Mode is compatible with Call Of Duty Modern Warfare 2,3

What Is Dual Trigger Rapid Fire?

This mode was specially designed for secondary weapon in Call Of Duty games such as ìone shotî hand guns and semi-auto pistols.

How Does Dual Trigger Rapid Fire Work?

When holding dual wielding semi-auto pistols (for example P99 in MW3), user pulls both triggers and gets Rapid Fire on both guns. Dual trigger Rapid Fire will not usually make Machine Pistols (Fully Automatic Pistols) shoot any faster though.

How Do I Operate Dual Trigger Rapid Fire?

To turn Dual Trigger Rapid Fire ON, press and hold mode switch on the back of the controller, then tap Aim Button (L1 Button in default button layout). The Player 4 LED will twinkle, and then stay ON to lets user know Dual Trigger Rapid Fire is ready to use.
To toggle Dual trigger Rapid Fire OFF, hold the mod switch on the back of the controller, and tap the D-pad down. Player 4 LED will twinkle and then turn off.

What Games Is Dual Trigger Rapid Fire Mode Compatible With?

Dual Rapid Fire Mode is compatible with all Call of Duty games.

What Are Button Layout Maps?

Most users play their favorite COD games using DEFAULT button layout. But letís not forget about the option for the left handed gamers (so called LEFTY button layout) and 3 more button layouts offered by the game (Default, Tactical, Lefty, NOM4D, and NOM3D Tactical). Although all modes on on our Rapid Fire chip are set up for the DEFAULT layout version, now you are able to make any mode work on your favorite button layout.

How Do I Operate Button Layout Maps?

Let's start with LEFTY button layout as an example:

  • Activate desired modes on your controller.
  • Go into your game options screen and set the LEFTY button layout
  • Now you have to set your button layout on your controller to make all desired modes work on the selected layout.
  • To switch to a different button layout, hold your mod switch on the back of your controller and hold the Triangle button.
  • Then count the number of blinks on the LED 4. A number of times LED 4 blinks will indicate the mode you are currently in, after you finish changing layouts Player 4 LED will not stay ON.
Mode 1Default (LED 4 blinks 1 time)
Mode 2Tactical (LED 4 blinks 2 times)
Mode 3Lefty (LED 4 blinks 3 times)
Mode 4Nom4d* (LED 4 blinks 4 times)
Mode 4NOM3D Tactical* (LED 4 blinks 5 times)
All features are supported except dual-trigger Rapid Fire and active reload. Single-Trigger Rapid Fire and Akimbo are supported.
All desired modes will now work on the button layout you have chosen.
If you change the button layout option, always remember to change it on both your game setting option screen and the controller.
To operate (turn on/off, switch between sub-modes) all modes in any button layout map you will have to press and hold mod switch and tap/press/hold corresponding command assignments.
Example: Default Layout-To turn Rapid Fire ON you have to hold mode switch and tap Fire Button(command assignment). it is Right Trigger in DEFAULT button layout
LEFTY layout-To turn Rapid Fire ON you have to hold mode switch and tap ìFire Buttonî (command assignment). It is Left Trigger in LEFTY button layout.

What Games Is Button Mapping Compatible With?

Button Mapping Feature is compatible with all Call Of Duty Games.
NOTE: We strongly recommend not to use B grade batteries (especially Duracell) with our modded controllers as they might affect gaming performance negatively. Please use any A grade batteries for better performance.

10 Mode PS3 Diagram