Reasons to choose the 10 Mode Modded Controller
- All of the mods work with installed tact switches. This means you never have to activate them. Just press the tact switch and it works!
- Each exclusive mod has its own assigned tact switch
- All 10 modes of rapid fire are completely programmable
- Beginner friendly - Stage 1
- 100% undetectable
How to use your 10 Mode Xbox 360 Modded Controller
How to Adjust Rapid Fire Speed
All 10 modes are adjustable. This means you can set each mode to correspond to each of your favorite COD classes and you'll never have to adjust the controller again!
To adjust the speed, start by holding down the left trigger and right trigger. With both triggers held down, press the synchronize button on the front of the controller. All 4 LEDs on the controller will light up indicating you are now in adjust mode.
You will adjust the speed by indicating a value for the tens place, ones place, and tenths place. Once you enter adjust mode the controller is in the tens place adjustment mode. Pressing the left trigger will lower the value while pressing the right trigger will increase the value. The player 3 light will blink a number of times indicating the value of the tens place (i.e. 2 blinks = 20). Once you have set the value for the tens place, press the synch button to switch to the ones place. Set the ones place in the same manner you set the tens place. Once done setting the ones value, press the synch button to switch to the tenths place. Set the tenths place in the same manner you set the tens and the ones place. When done setting the value for the tenths place press the synchronize button to switch out of adjust mode. All 4 LEDs will light up indicating you are leaving adjust mode.
Instructions for Jitter Mod (COD)
To use Jitter press and hold custom button 3 on the back of the controller.
Instructions for Fast Reload (COD)
Click here to download fast reload modes list
To activate fast reload press custom button 1 on the back of the controller. The player 3 light will blink a number of times indicating which fast reload mode you are in (i.e. 6 blinks - mode 6).
To adjust the delay, start by holding down the left trigger and right trigger. With both triggers held down, press custom button 1 on the back of the controller. All 4 LEDs on the controller will light up indicating you are now in adjust mode.
You will adjust the speed by indicating a value for the hundreds place, tens place, and ones place. Once you enter adjust mode the controller is in the hundreds place adjustment mode. Pressing the left trigger will lower the value while pressing the right trigger will increase the value. The player 3 light will blink a number of times indicating the value of the hundreds place (i.e. 2 blinks = 200). Once you have set the value for the hundreds place, press the synch button to switch to the tens place. Set the tens place in the same manner you set the hundreds place. Once done setting the tens value, press the synch button to switch to the ones place. Set the ones place in the same manner you set the hundreds and the tens place. When done setting the value for the ones place press the synchronize button to switch out of adjust mode. All 4 LEDs will light up indicating you are leaving adjust mode.
Instructions for Active Reload (GOW2):
To use active reload in Gears of War 2 press the right bumper. To switch active reload modes press custom button 2 on the back of the controller. The player 2 light will flash indicating what active reload mode you are in (i.e. 3 links = mode 3). To turn active reload on/off hold the left trigger and press custom button 2 on the back of the ontroller. The player 2 light will switch on /off indicating if fast reload is active.
Active Reload Modes Mode 1 Pistols Mode 2 Hammerburst/Lancer Mode 3 Shotgun Mode 4 Sniper Rifle
Instructions for Drop Shot (COD)
To use drop shot simply press custom button 4 on the back of the controller. Your character will drop to the floor will simultaneously begin shooting straight ahead.
Instructions for Jump Shot (COD)
To use jump shot simply press custom button 6 on the back of the controller. Your character will jump and will simultaneously begin shooting straight ahead.
Instructions for Quick Scope
To operate quick scope press custom button 5 on the back of the controller. This will zoom in, take a shot, and zoom back out.
How to Operate Color Changing Thumbsticks
To activate the illuminating thumbsticks simply hold down the right trigger and press the synchronize button. This will activate the first mode of the thumbsticks. To cycle thru all 8 modes simply hold the right trigger and press the synchronize button once for each mode.
Mode 1 Both Thumbsticks color 1 Mode 2 Both Thumbsticks color 2 Mode 3 Both Thumbsticks 1 + 2 Mode 4 Scrolls colors slowly Mode 5 Scrolls colors quickly Mode 6 Both thumbsticks flash both colors in sequence Mode 7 Both thumbsticks flash in time with rapid fire Mode 8 Both thumbsticks flash in time with rapid fire (different sequence)
Default Rapid fire and fast reload settings
Mode Speed Compatible With: Mode 1 6.5 Black Ops Mode 2 8.2 MW2 Mode 3 43.4 MW w/doubletap Mode 4 9.9 GOW 1 & 2 Mode 5 9.3 Halo Series Mode 6 23.3 GTA 4 Mode 7 8.0 Mode 8 8.9 Mode 9 6.5 DUAL TRIGGER - Black Ops Mode 10 8.2 DUAL TRIGGER - MW2
Default Fast Reload Speeds Mode 1 33 Mode 2 34 Mode 3 36 Mode 4 42 Mode 5 53 Mode 6 54 Mode 7 56 Mode 8 63 Mode 9 213 Mode 10 214
Fast Reload Speeds - COD:MW2 ACR/L86LSW/M4A1 33 M16 34 USP .45 36 Vector 42 MP5K 53 FAL/UMP45 54 SCAR-H 56 FAMAS 62 MG4 213 RPD 214
Fast Reload Speeds - COD:MW AK74u/G36C/G3/M4 Carbine/M14/MP44/M16A4 45 MP5/P90 53 Mini uzi/Skorpion 66 M249 SAW 157 M60E4 213 RPD 214 Fast Reload Speeds - COD:WAW Gewher 61 M1A1 68 MG-42 42 STG-44 46 SVT-40 65
