General Support -> 10 Mode Playstation 3 Modded Controller

How to use your Multi Class Action Playstation 3 Modded Controller

Activating PS3 Multi Class Controller

PLEASE NOTE: Some of our Multi Class Action PS3 controllers include an additional tac switch installed on the back of the controller. This switch can be used instead of the Left D-pad button for any of the functions that require the Left D-pad to be pressed. If you do not have a tac switch, using the Left D-pad button will work the same.

The menu system is setup in 3 Classes.
1. Press DOWN on the D-pad and hold to activate the Class (once activated, the player 4 LED will light up Purple)

Class 1 is marked by a Blue Led in Player 4 Slot
Class 2 is marked by a Purple Led in Player 4 Slot
Class 3 is marked by a Green Led in the Player 4 Slot

Please Note: You can browse through the classes by holding down on the D-pad until you complete the cycle from Purple, Blue, and Green. The 4th D-pad Down, will shut off the Chip. If you hold it down again, it will activate the chip with the Class 1 again lighting up Purple in player 4.

2. Press UP on the D-pad and hold to activate the Sub Class (once activate, the player 3 LED will light up Blue Default Rapid Fire)

EXCLUSIVE ADD-ON MODS

PLEASE NOTE: To activate the exclusive add- on mods, press Function Key AND D-pad Left (or rear tac switch).

FUNCTION KEYLED 4 COLORFUNCTION
Left StickPurpleSniper
L1TealAkimbo
TriangleYellowJitter
Right Analog StickWhiteQuick Knife
XGreenAuto Burst

FUNCTION KEYLED 3 COLORFUNCTION
R1BlueRapid Fire
CircleRedDrop Shot

PLEASE NOTE: To cycle through the exclusive add- on mode, hold the Function Key AND D-pad Left (or rear tac switch) and count the number of time the LED light blinks.

Rapid Fire: Press R1-(1 Mode)

  1. Rapid Fire on TRIGGER

Akimbo: Press L1- (5 Modes)

  1. Akimbo RF: Rapid Fire on trigger and ADS
  2. Easy Akimbo RF: Rapid Fire on trigger and ADS automatically with trigger pull
  3. Easy Akimbo: Trigger Press Automatically Presses ADS. {EASY AKIMBO FOR MACHINE GUNS}
  4. Auto Aim: ADS Toggles to Automatically Lock On Enemy’s Using Aim Assist (Works For Zombies)
  5. Auto Aim RF: ADS Locks Onto ENEMIES And Trigger is Rapid Fire

Burst: Press X (4 Modes)

  1. 2 Round Burst On Trigger
  2. 3 Round Burst On Trigger
  3. 4 Round Burst On Trigger
  4. 4 Round Burst On Trigger

Sniper: Press Left Stick (3 Modes)

  1. Quick scope 1: Automatically Fires Weapon As Soon As Weapon Pulls Up Speed 1 (Faster)
  2. Sniper Hold Breath: ADS Automatically Presses Hold Breath Button When Pressed
  3. Sniper Hold Breath 2 Round Burst: Automatic Hold Breath And 2 RND Burst
Quick Scope Note: Quick Scope Is Adjustable With the Speed Setting 1 Is Fastest Setting and Speed 17 Is Slowest

Drop Shot: Press Circle (4 Modes)

  1. Drop Shot: Crouch Button Is Held When Trigger Is Pressed (Player Lays Down)
  2. Drop Shot AI: Drop Shot Is Inhibited When ADS Is Held
  3. Drop Shot RF: Player Drops When Trigger Is Pressed. Trigger Has Rapid Fire
  4. Drop Shot RF AI: Drop Shot RF Is Inhibited When ADS Is Held. While Aiming Trigger Has Normal Rapid Fire

Jitter: Press Triangle (3 Modes)

  1. Jitter: Rapid Fire Glitch That Makes M16 Rapid Fire (Pre MW3)
  2. Jitter AI: Jitter Aim Inhibited
  3. Jitter AI->RF: Jitter Aim Inhibited. Trigger Has Rapid Fire When Aim Is Inhibited (Pre MW3)

Quick Knife: Press Right Stick (3 Modes)

  1. Quick Knife 1: When Melee Is Pressed Quick Knife Routine Loops. Has To Have Semtex Or Tomawk Equipped (Fast)
  2. Quick Riot: When Melee Is Pressed And Riot Shield Is Equipped, Quick Riot Routine Loops. Has To Have Semtex Equipped (Medium)
  3. Quick Knife 2: When Melee Is Pressed Quick Knife Routine Loops. Has To Have Semtex Or Tomawk Equipped (Slowest)

You can adjust the shot per second (SPS) for Rapid Fire.

Adjusting Rapid Fire Speed and Burst Modes

Hold down the Left D-pad (or rear tac switch), until Player 3 & 4 LED flash Red continuously.

Please Note: You will use L1 to decrease shots per second and R1 to increase shot per second. Player LED 4 represents the tens place and Player LED 3 represents the ones place.

For example, if you want to adjust it to 15 shot per second, Player LED 4 will blink 1 time and Player LED 3 will blink 5 times.

Once you selected which speed setting you want, HOLD DOWN LEFT DPAD (or rear tac switch), and it will save the Speed setting. The same process applies to adjusting the number of rounds per burst when using burst mode.

Suggested MW3 Speeds 11-13 Shots per second (speed setting 11-13).

NOTE: The classes and slots were designed to be programmed and used in live game play by the use of the D-Pad to browse through the modes. This makes it convenient to change your setting while playing the game.

ASSIGNING MODS TO EACH CLASS (VERY IMPORTANT)

Each Class has 2 Available Empty Slots for a total of 6 slots, since there are 2 in each Class.

Activating Slots:

When you hold DOWN on the D-Pad, and you enter the 1st Class, Hold UP on the D-pad until your player 3 LED lights up Blue (Default Rapid Fire). This activates SLOT 1. We have a color chart that shows all the modes and sub-modes that can be assigned to each slot.

To Assign an Exclusive Mod to SLOT 1, hold LEFT on the D-pad (or rear tac switch) and hold the corresponding button on the chart for the exclusive add-on you would like to select. The player 3 LED will switch to the color of the exclusive add-on that you have selected.

To switch to SLOT 2, hold UP on the D-pad until the player 3 LED blinks, indicating you are now in SLOT 2. To turn off the SLOTS, hold up on the D-pad until the player 3 LED turns off. Repeat these steps to cycle between SLOT 1, SLOT 2, and OFF.

Slot 1:

With SLOT 1 selected, if you wanted Drop Shot, hold LEFT DPAD (or rear tac switch) and CIRCLE, and your Player 3 Led will light up RED. It will blink a number of times representing the MODE that you are selecting.

For example, if you want to select MODE 2 of drop shot, hold the left D-pad and the CIRCLE button until the player 3 light blinks 2 times. Let go immediately. If it blinks 3 times, you will be in MODE 3. A white light will blink after you let go confirming the MODE has been selected.

There are multiple Drop Shot Sub-Modes as well as multiple modes for the other exclusive mods (i.e. Akimbo, jitter, burst, etc). If you wanted to choose a different exclusive add-on from the Chart, just repeat the function by Holding Down LEFT DPAD (or rear tac switch) and the exclusive add-on’s corresponding button (see chart) and your player 3 Led will change to the color that corresponds to the option on the Chart you would like to select.

Slot 2:

To Enter Slot 2 of any class, hold UP on the DPAD, and your player 3 LED will flash again, indicating its ready for programming (see previous step). Remember, all the Slots are blue by default for Rapid fire.

Trouble Shooting PS3 Controller

There are a few things that may cause your PS3 mods to stop working.

Troubleshoot # 1:

There is a reset buttons on all PS3 controllers. It is located on the back of the controller, on the top-right. It is a small hole, stick a paperclip in it to reset the controller. Once you stick a pin or paperclip in it, your controller should reset back the default setting on your controller.

Troubleshoot # 2:

If you accidentally press the tac switch (button the back of the PS3) and triangle, that can cause your mods to lock. Tac switch and triangle has 10 different mode. It is important that it stays on mode 1 at all time. To change it to mode 1, hold down the tac switch and triangle and count the number of time player 4 LED light blinks. The number of time player 4 light blinks indicates what mode you are in. Let it cycle through all ten mode until it blinks only one time.